Basic description

AeroMaster FP units are representative of their original frameless construction, which helps them achieve great parameters according to EN 1886. In case of installation into the false ceiling you will appreciate its small height of only 360 mm. These units are perfect for ventilation and air conditioning of administrative buildings, shops, restaurants and other places. Thanks to sandwich construction of panels and optimized design of fans the units achieve perfect noise parameters. Because of units´ good looking design they can be even installed in rooms without false ceiling. Some of many advantages of FP units are simple installation and very favorable price. The prices are worked out individually by workers of technical consultancy and trade department based on particular demands of the customer and submitted parameters.

 

Bezrámová konstukceModern frameless construction

The construction is framed by combination of panels and bars between them and has perfect noise parameters. The insulation of casing is above standard. The thickness of upper and bottom casing is 25 mm and the side casing is 40 mm thick and filled with mineral wool of 110 kg/m3.
Hladké plochyAbsolutely smooth internal surface

The inside is easily cleanable and that is a condition of perfect hygiene.
 
Ventilátory s řemenovým převodem300 optional fan sections

This wide range of fan sections allows you to optimise the through-flow and pressure characteristics of every single unit.


Elektrické ohřívače
Electric heaters with switching electronics
Integrated electronics provide comfortable control and lowers installation costs.

RekuperátoryComplexity

The units have following functions provided by their accessories which is above standard and unusual in this category: fans, heating, cooling, mixing, heat recovery, filtration, control, noise attenuation.

Filtry
Interchangeable side of supply connection

Possibility to change the side of connection of power supply of fans and supplies of water and electric heating in the place of installation.

Boční závěsySimple installation

Side brackets for simple installation.

 
 
Aplikace jednotek AeroMaster FP
AeroMaster FP - návrhProject and calculation

To project and calculate a device we recommend you to use our selection software AeroCAD. It is intended for selection, dimensioning and calculation of air handling devices of REMAK company. It takes 5 minutes to create a unit including control.